Commercial Hardscaping St. Thomas

Step 1, Coordinate civil, landscape, architectural, structural, waterproofing, utility, accessibility, lighting, irrigation, and furnishing details.

Step 2, Verify survey control, subgrade, drainage, membranes, sleeves, foundations, and structural load limits before finish layers.

Step 3, Build walls, curbs, stairs, slabs, bases, planters, and drainage in an order that preserves access and completed work.

Step 4, Install pavers, stone, tactile surfaces, rails, furniture, soil, and transitions to controlled lines, grades, and joints.

Step 5, Test drainage and routes, correct rocking or trip points, complete protection and cleaning, and close as-built interfaces.

Harrowgate constructs hardscapes from underground coordination through final surface alignment. We lock down survey control, build structural and drainage elements first, then install visible materials in a sequence that preserves finished edges and keeps access open around the site.

Coordination and quantity verification. We overlay landscape, civil, architectural, structural, electrical, irrigation, and utility drawings to identify conflicts. Elevations at doors, ramps, curbs, walls, drains, and tree openings are verified in the field. Material quantities include cuts, colour blends, corner units, caps, and reasonable matching stock for future repairs.

Demolition and earthwork. Existing paving, walls, curbs, foundations, and unsuitable soil are removed within controlled boundaries. Utilities are located and daylighted where required. Subgrade is shaped to the design and proofed, with undercut and replacement documented. Bulk drainage and sleeves are completed before granular base closes the excavation.

Foundations, walls, and curbs. Reinforced concrete footings, grade beams, curbs, stair foundations, planter walls, and equipment bases are formed and placed to structural drawings. Anchor bolts, conduits, sleeves, drains, and waterproofing interfaces are fixed before concrete. Wall units, stone, or masonry are installed only after support reaches the required condition.

Pavement sections. Concrete slabs and unit pavers receive their own engineered base, reinforcement, bedding, joints, and restraint. Vehicular, pedestrian, and permeable areas are not mixed under one detail. The base is trimmed to account for finish thickness, and transitions are built flush enough for accessible travel, carts, and snow-clearing equipment.

Details and site elements. Steps, ramps, tactile indicators, planters, seat walls, bollards, bike racks, benches, lighting bases, and waste receptacles are laid out from approved shop drawings. Fasteners and foundations match loads and material. Drainage holes, weeps, waterproofing, and isolation joints are kept functional at every element.

Cleaning, protection, and restoration. Completed surfaces are protected from concrete wash, soil, rust, asphalt, and equipment. Cleaning methods are tested before broad use. We fill paver joints, seal specified joints, adjust covers, restore landscape edges, and complete a night review where lighting alignment is part of the finished hardscape.

Hardscape closeout includes an elevation and accessibility walk, drainage test, inspection of joints and restraints, wall and cap alignment, site-furniture anchorage, and cleaning. We document concealed foundations, sleeves, drains, and waterproofing before cover. Extra matching pavers or masonry are stored in an agreed location because future utility access can be repaired more accurately with original production material.